Toyota Sienna Recommended Maintenance
| Every 5,000 Miles | Every 15,000 Miles | Every 30,000 Miles |
| -Check installation of driver’s floor mat -Check CT State Inspection expiration date -Check for open campaigns/recalls -Replace engine oil and filter* -Rotate tires and check condition (tread depth) -Set tire pressures to correct psi -Check that all exterior light bulbs are functioning -Inspect front and rear brake components -Inspect and top off fluid levels -Perform multi-point inspection with print-out -Road test of vehicle*10,000 miles for synthetic oil
|
-Check installation of driver’s floor mat -Check CT State Inspection expiration date -Check for open campaigns/recalls -Replace engine oil and filter* -Rotate tires and check condition (tread depth) -Set tire pressures to correct psi -Check that all exterior light bulbs are functioning -Inspect front and rear brake components -Inspect and top off fluid levels -Inspect condition of drive axle boots -Check condition of brake fluid -Check transfer case and differential fluids -Check operation of cooling system and/or indication of coolant leak -Complete inspection of steering and suspension components -Complete inspection of exhaust system -Inspect air filter -Inspect wiper inserts/blades -Inspect cabin air filter (if applicable) -Lubricate propeller shaft (where applicable) -Inspect fuel lines and charcoal canister -Reset maintenance/tire pressure warning lights -Perform multi-point inspection with print-out -Road test of vehicle*10,000 miles for synthetic oil |
-Check installation of driver’s floor mat -Check CT State Inspection expiration date -Check for open campaigns/recalls -Replace engine oil and filter* -Rotate tires and check condition (tread depth) -Set tire pressures to correct psi -Check that all exterior light bulbs are functioning -Inspect front and rear brake components -Inspect and top off fluid levels -Inspect condition of drive axle boots -Check condition of brake fluid -Check transfer case and differential fluids -Check operation of cooling system and/or indication of coolant leak -Complete inspection of steering and suspension components -Complete inspection of exhaust system -Replace air filter -Inspect wiper inserts/blades -Replace cabin air filter (if applicable) -Lubricate propeller shaft (where applicable) -Inspect fuel lines and charcoal canister -Reset maintenance/tire pressure warning lights -Inspect ignition wires and distributor cap -Perform multi-point inspection with print-out -Road test of vehicle *10,000 miles for synthetic oil |
*Some model year Sienna’s may have synthetic oil and only require an oil and filter change every 10,000 miles.
